国产AA精品亚洲_欧美日韩在线精品一区二区_91亚洲中文字幕在线观看_欧美A级大片视频_乱码在线中文字幕加勒比_无遮挡h肉动漫网站_国产av天堂久久_丰满少妇高潮在线播放不卡_亚洲二区三区视频_精品亚洲无码乱伦

背膠拉鏈?zhǔn)侵冈谄胀ɡ満头浪z水背在防水拉鏈帶子本身的基礎上，經過高溫背膠熱熔機，將膠水熔解在普通拉鏈和防水膠水背在防水拉鏈帶子的背面，再貼上一層油性離型紙，就是成品的背膠拉鏈和背膠防水拉鏈。

瑞鴻富 背膠拉鏈和背膠防水拉鏈

瑞鴻富 背膠拉鏈和背膠防水拉鏈

瑞鴻富 背膠拉鏈和背膠防水拉鏈

瑞鴻富 背膠拉鏈和背膠防水拉鏈

背膠拉鏈和背膠防水拉鏈的離形紙一般常用的是白色，比較少用的是黃色紙和透明色紙，乳白色紙等。切斷背膠拉鏈和背膠防水拉鏈一般白色紙有分加厚，和普通厚度，常用的是普通厚度的離形紙，生產時如果你不說是用什么樣的紙，一般生產人員會自動給你用普通厚度。

瑞鴻富 背膠拉鏈和背膠防水拉鏈

瑞鴻富 背膠拉鏈和背膠防水拉鏈

給大家講解一下拉鏈知識

材料：尼龍拉鏈、樹脂拉鏈、金屬拉鏈。

1. 尼龍拉鏈：隱形拉鏈、穿心拉鏈、背膠防水拉鏈、不穿心拉鏈、雙骨拉鏈、編織拉鏈等。

2.樹脂拉鏈：金（銀）牙拉鏈、透明拉鏈、半透明拉鏈、畜能發光拉鏈、蕾射拉鏈、鉆石拉鏈。

3. 金屬拉鏈：鋁牙拉鏈、銅牙拉鏈（黃銅、白銅、古銅、紅銅等）、黑鎳?yán)湣?

拉鏈的保養技巧

1、平時使用時，要注意拉鏈上有無“破肚”、“脫齒”、歪斜等毛病，有這些毛病要及時修理，不要再硬拉。如果拉鏈發松與脫齒，可用小錘在拉鏈頭上輕輕敲幾下，使上下鏈齒咬得緊一些，就不會再脫齒了。

2、鋁合金的拉鏈比較容易受到腐蝕，因此應保持干燥，切勿受潮，以防鋁齒生成白色的氧化物，日久還會導致拉鏈生銹，影響使用，同時也要注意不與堿性和酸性的物質接觸。在保存時要保證一定的通風性，不要密封保存，也不要保存在充滿濕氣的環境下，有必要時得使用防濕紙或除濕劑。如果拉鏈?zhǔn)艹币院?拉起來發澀,這時,先將拉鎖曬一曬,然后,在拉鎖的牙齒上涂上一些蠟,再用火烤化,這樣使用起來,就非常潤滑了。

3、拉動拉鏈時，應先將兩邊的齒靠攏對齊，然后捏住拉鏈頭順著軌道輕輕向前拉動，不要用力猛拉，以免造成“牙齒歪斜”、“破肚”和“脫齒”。如果拉鏈發澀，拉動不靈活時，可以先用布擦干凈后在“牙齒”上打一層白蠟。

4、帶拉鏈的各種箱包、口袋或皮夾，不要裝得過滿，不然容易使拉鏈造成“破肚’、“脫齒”、歪斜和布軟等現象。

5、拉鏈?zhǔn)且揽窟B續排列的鏈牙，使物品并合或分離的連接件，現大量用于服裝、包袋 、帳篷等

概述

拉鏈的定義：

1 由兩條帶上各有一排金屬齒或塑料齒組成的扣件，用于連接開口的邊緣（如衣服或袋口），有一滑動件可將兩排齒拉入聯鎖位置使開口封閉；

2 連結于某物（作為被吊起或放落的物體）上以拉緊、穩定或引導該物的鏈。

組成

拉鏈由鏈牙、拉頭、上下止（前碼和后碼）或鎖緊件等組成。其中鏈牙是關

鍵部分，它直接決定拉鏈的側拉強度。一般拉鏈有兩片鏈帶，每片鏈帶上各自有一列鏈牙，兩列鏈牙相互交錯排列。拉頭夾持兩側鏈牙，借助拉襻滑行，即可使兩側的鏈牙相互嚙合或脫開。

拉鏈組件的詳細內容為：

1. 布帶tape：由棉紗、化纖或混合化纖織成的柔性帶，用于承載鏈牙及其他拉鏈組件；

2. 帶筋bead ：布帶邊緣用來承載金屬或塑料鏈牙的加強部分；

3. 筋繩rope ：指帶筋中間由多股纖維組成的繩狀物；

4. 鏈牙scoops：指金屬、塑料等材料通過加工后呈一定形狀的齒牙；

5. 中芯線filler cord： 由多股纖維線加工而成，用于尼龍拉鏈牙鏈生產的繩狀物；

6. 牙鏈chain： 指連續排列的牙；

7. 牙鏈帶 one side zipper chain ：牙鏈固定在布帶上稱牙鏈帶；

8. 鏈帶zipper chain： 由兩邊牙鏈帶嚙合而成鏈帶；

9. 上止top stop： 固定于牙鏈帶上，限止牙鏈拉合時拉頭滑出牙鏈帶的止動件；

10. 下止bottom stop：固定于牙鏈帶上，限止牙鏈拉開時拉頭滑出牙鏈帶，并使得兩邊牙鏈帶不可完全分開的止動件；

11. 前、后帶頭Back & forth head tape ：拉鏈上沒有鏈牙部分的布帶稱帶頭，上止端為前帶頭，下止端為后帶頭；

12. 插管（也稱插銷）pin separable：固定在開尾拉鏈尾端，用于完全分開鏈帶的管形件；

13. 插座box retainer（應該是 pin box）： 固定在開尾拉鏈尾端，用于完全分開鏈帶的方塊件；

14. 雙開尾檔件 two pin：一種與插管配合，用于雙開尾拉鏈上的管形檔件；

15. 加強膠帶 strengthened tape：用于增強插管、插座與布帶結合強度，提高拉鏈?zhǔn)褂脡勖膹?fù)合型薄片；

16. 拉頭slider：使鏈牙嚙合和拉開的運動部件；

17. 拉片puller： 是拉頭的一個組件，它可設計成各種幾何形狀與拉頭體聯接或通過中間件與拉頭體聯接，實現拉鏈開合；（可以直接掛，和間接掛）；

18. 中間聯接件 the connecter： 聯接拉頭體與拉片的中間元件。深圳市瑞鴻富科技有限公司帶您進入背膠拉鏈和背膠防水拉鏈應用。

形容詞性

“拉鏈”這個詞，當今在初中男女中走紅。主要用來形容長得像拉鏈一樣九曲連環，山路十八彎，正面像拉鏈一樣糾結扭曲，側面像拉鏈側面一樣一馬平川的男生。

Tell everyone about zipper knowledge
Material: nylon zipper, resin zipper, metal zipper.
1. Nylon zipper: invisible zipper, through zipper, adhesive waterproof zipper, non-through zipper, double bone zipper, woven zipper, etc.
2. Resin zipper: gold (silver) tooth zipper, transparent zipper, translucent zipper, animal energy luminous zipper, bud shot zipper, diamond zipper.
3. Metal zipper: aluminum zipper, copper zipper (brass, cupronickel, bronze, copper, etc.), black nickel zipper.
Zipper maintenance skills
1. In normal use, pay attention to whether the zipper has "broken belly", "out of teeth", crookedness and other defects. These defects should be repaired in time, and no more deadlifts. If the zipper is loose or out of teeth, you can use a small hammer to gently tap the zipper head a few times to make the upper and lower chain teeth bite tighter, so that the teeth will no longer be out of teeth.
2. Aluminum alloy zippers are more susceptible to corrosion, so they should be kept dry and not damp to prevent the aluminum teeth from generating white oxides, which will cause the zippers to rust over time and affect the use. At the same time, be careful not to be alkaline Contact with acidic substances. Ensure a certain degree of ventilation during storage. Do not store in a sealed or humid environment. Use moisture-proof paper or dehumidifier when necessary. If the zipper gets damp and becomes astringent when it is pulled up, at this time, first expose the zipper to the sun, then apply some wax on the zipper's teeth, and then bake it with fire, so that it will be very lubricated when used.
3. When pulling the zipper, you should first align the teeth on both sides, then pinch the zipper head and gently pull it forward along the track, do not pull hard, so as not to cause "teeth crooked", "broken belly" and "out of teeth" . If the zipper is astringent and the pulling is not flexible, you can wipe it with a cloth first and then apply a layer of white wax on the "teeth".
4. All kinds of bags, pockets or wallets with zippers should not be overfilled, otherwise the zippers will easily cause "broken belly", "out of teeth", crookedness and soft cloth.
5. Zipper is a connecting piece that relies on continuously arranged chain teeth to merge or separate items. It is now widely used in clothing, bags, tents, etc.
Overview
Definition of zipper:
1 A fastener made up of two belts with a row of metal teeth or plastic teeth, used to connect the edge of the opening (such as clothes or bag mouth), a sliding piece can pull the two rows of teeth into the interlocking position to close the opening;
2 A chain attached to something (as an object being lifted or dropped) to tighten, stabilize, or guide the object.
composition
The zipper is composed of chain teeth, slider, top and bottom stop (front code and back code) or locking parts. Where chain teeth are off
The key part, it directly determines the side pull strength of the zipper. Generally, a zipper has two chain belts, and each chain belt has a row of chain teeth, and the two rows of chain teeth are arranged in a staggered manner. The slider clamps the fastener elements on both sides, and slides with the help of the pull tabs to enable the fastener elements on both sides to engage or disengage each other.
The details of the zipper assembly are:
1. Tape: a flexible tape woven from cotton yarn, chemical fiber or mixed chemical fiber, used to carry fastener elements and other zipper components;
2. Ribbed bead: The edge of the cloth belt is used to carry the reinforced part of the metal or plastic chain teeth;
3. Rope: refers to a rope made up of multiple strands of fibers in the middle of the ribs;
4. Chain teeth scoops: refers to teeth that have a certain shape after metal, plastic and other materials are processed;
5. Filler cord: It is processed by multi-strand fiber thread and is used for the production of nylon zipper chain;
6. Tooth chain: refers to the teeth arranged in a row;
7. Tooth chain belt one side zipper chain: the tooth chain is fixed on the cloth belt and it is called the tooth chain belt;
8. Zipper chain: A chain belt is formed by the meshing of two tooth chain belts;
9. Top stop: fixed on the tooth chain belt to limit the pull head from sliding out of the tooth chain belt when the tooth chain is pulled together;
10. Bottom stop: fixed on the tooth chain belt to limit the pull head to slide out of the tooth chain belt when the tooth chain is pulled apart, and make the two side tooth chain belts a stopper that cannot be completely separated;
11. Back & forth head tape: The tape without the chain teeth on the zipper is called the head, the top end is the front head, and the bottom end is the back head;
12. Intubation (also called pin) pin separable: a tube-shaped piece that is fixed at the end of the open-end zipper and used to completely separate the chain strap;
13. Socket box retainer (should be pin box): fixed at the end of the open-end zipper, used to completely separate the box pieces of the chain belt;
14. Two pin: a tube-shaped pin used for double-opening zipper in conjunction with a cannula;
15. Strengthened tape: a composite sheet used to enhance the bonding strength of the cannula, socket and cloth tape, and increase the service life of the zipper;
16. Slider: the moving part that makes the chain teeth engage and pull apart;
17. Puller puller: It is a component of the slider, it can be designed into various geometric shapes to connect with the slider body or connect with the slider body through an intermediate piece to realize the opening and closing of the zipper; (can be directly hung, and indirectly hung) ；
18. Intermediate connecting piece the connecter: The intermediate element that connects the slider body and the slider. Shenzhen Ruihongfu Technology Co., Ltd. takes you into the application of adhesive zippers and adhesive waterproof zippers.
Adjective
The word "zipper" has become popular among men and women in junior high schools today. Mainly used to describe a boy who looks like a zipper with a chain of nine twists, with eighteen bends on the mountain road, the front is tangled and twisted like a zipper, and the side is like the side of the zipper.